Product Name : HumiSeal series

Conformal coating is a protective chemical coating or polymer film at 25~75µm thickness (50µm typical) that ‘conforms’ to the circuit board topology.  It protects electronic circuits from harsh environments that may contain moisture or chemical contaminants. By being electrically insulating, it maintains long-term surface insulation resistance (SIR) levels and thus ensures the operational integrity of the assembly.  It also provides a barrier to air-borne contaminants from the operating environment, such as salt-spray, thus preventing corrosion.

⊙ Conformal coatings - selection guide

Item \ Type

Acrylic base

PU base

Silicone base

Operation

A

B

C

Stripping(chemical type)

A

B

C

Stripping(physical type)

A

B

--

Anti-erosion resistance

C

A

B

Mechanical strength

C

A

C

Temperature resistance

C

C

A

Moisture resistance

A

A

A

Moisture resistance (long term)

A

A

B

Open time

A

B

C

Best hardening

A

B

B

Room temp. hardening

A

B

B

High temp. hardening

A

B

B

 

⊙ HumiSeal® Acrylic base

Item No. 1B12 1B31 1B66 1B73 UV7900 UV7920
MIL ok ok ok ok  -  -
UL pass pas pass  -  -  -
Visible light checking ok ok ok ok
Curing type air air air air UV UV
Drying time 10 min 10 min 10 min 30 min 10 min 10 min
Hardening condition RT-24hr 77℃-30min RT-30hr 77℃-30min RT-30hr 77℃-30min RT-24hr 77℃-90min 200W/in 10sec RT-4day 200W/in 20sec 110℃-20min
Testable time 7 day 7 day 7 day 7 day 4 day 20 min
Viscosity (cps) 40 220 220 270 110 900
Solid content (%) 20 35 35 30 100 100
Coating thickness (mil) 0.5 2.0 2.0 1.0 3.0 3.0
Coating area (ft2/ga) 530 240 240 270 900 900
Thinner 521 521 521 73 - -
Flast point (℃) 4 0 0 0 122 93
Shelf life 1 year 1 year 1 year 1 year 6 month 6 month
Stripper 1080 1080 1080 1080 1071 1071

 

⊙ HumiSeal® Polyurethane base

Item No. 1A20 1A271 1A33 1A34 1122 UV7993
MIL ok ok ok ok
UL pass pass pass pass pass -
Visible light checking ok ok ok ok ok
Curing type air air air air UV UV
Drying time 60 min 25 min 15min 2 hr 6 hr -
Hardening condition RT-24hr
77℃-3hr
RT-30day
77℃-30hr
88℃-20hr
RT-30day
77℃-30hr
88℃-20hr
RT-24hr
77℃-4hr
77℃-30min 200W/in 5 sec
RH50%-4day
Testable time 7 day 30 day 30 day 7 day 7 day 4 day
Viscosity (cps) 200 5000 220 200 5000 120
Solid content (%) 50 50 44 40 30 100
Coating thickness (mil) 2.0 5.0 2.0 2.0 2.0 3.0
Coating area (ft2/ga) 300 150 300 275 300 900
Thinner 521 521 521 521 -
Flash point (℃) 28 27 0 7 - 122
Open time 6 month 1 year 1 year 6 month 1 year 9 hr
Shelf life 6 month 1 year 1 year 6 month 1 year 6 month
Thinner 1071 1063 1063 1071 1063 1071

 

⊙ HumiSeal® Silicone base

Item No. 1C47 1C49 1C51 1C53 1C55 1C61
MIL ok ok ok ok applicating applicating
UL pass pass pass pass applicating applicating
Visible light checking ok ok ok ok ok ok
Curing type air moisture hear heat UV UV
Drying time 60 min 2 hrs - - - 60 min
Hardening condition RT-24hr
120℃
-30min
RT-30day
120℃
RH60%-20min
105℃-15min 105℃-15min 105℃-15min 300W/in 15 sec
RH50%-2hr
Testable time 7 day 7 day 15 min 15 min 15 min 1 day
Viscosity (cps) 220 1000 575 575 225 300
Solid content (%) 60 100 100 100 100 100
Coating thickness (mil) 2.0 5.0 3.0 3.0 1.0 3.0
Coating area (ft2/ga) 300 520 750 750 1600 800
Thinner 521 503 - - - -
Flash point (℃) 101 101 204 204 204 204
Open time 14 day 7 day 1 month 1 month 1 month -
Shelf life 1 year 6 month 6 month 6 month 6 month -
Stripper 1090 1090 1090 1090 1090 1090