Anaerobic adhesive

Thread locker - Pipe sealant - Retaining Compound
Anti-vibration, Anti-loosening, Corrosion resistance

Model
- Thread locker
- Pipe sealant
- Retaining compound
- Gasketing sealant

This combination does not exist.

Feature

Anaerobic adhesive is a type of adhesive that cures in the absence of oxygen. When applied between metals or other non-permeable materials, the adhesive is deprived of air and begins to polymerize and harden rapidly under the catalytic action of metal ions. It features a single-component formulation with no need for mixing. Curing occurs at room temperature, eliminating the need for additional heat or light. Once cured, it offers excellent chemical and vibration resistance, withstanding oils, fuels, and chemical agents. It is widely used for loosening prevention, leak-proofing, and rust protection, providing both sealing and fastening functions.

Specification

■Thead lockers

Color	Item no.	Viscosity (cps)	Breakaway (N-m)	Prevail (N-m)	Working temp.	Fixture time
Purple	11222	900~1500	6	4	-54°C~150°C	15min
Blue	11242	900~1400	8~19	3~7	-54°C~150°C	5min
Blue	11243	1300~3000	26	5	-54°C~180°C	10min
Blue	11248	蠟狀	23	5	-54°C~150°C	5min
Red	11262	1200~2400	26	32	-54°C~150°C	10min
Red	11263	400~600	34	34	-54°C~180°C	10min
Red	11271	400~600	17~40	23~40	-54°C~150°C	10min
Red	11272	4000~15000	34	36	-54°C~230°C	30min
Red	11277	6000~8000	32	32	-54°C~150°C	30min
Green	11290	20~55	10	29	-54°C~150°C	20min
Green	112701	500~900	26~50	≧15	-54°C~150°C	10min

．The thread locker is a one-component, self-curing adhesive that completely fills the gaps between threads. They can replace spring washers, double nuts and other mechanical fastening devices, simplifying product design. They also prevent screws from corroding, seizing, loosening, and leaking, reducing maintenance time. They provide permanent security for screw assemblies and enhance the robustness of the machinery.

■Pipe sealant (thread sealant)

Color	Item no.	Viscosity (cps)	Breakaway (N-m)	Pressure resistant (Psi)	Working temp.	Fixture time
Brown	13542	400~800	18	10,000	-54°C~150°C	30min
Purple	13545	9000~20000	4	10,000	-54°C~150°C	30min
Red	13554	1500~3500	19	10,000	-54°C~150°C	20min
White	13565	175000~525000	3	10,000	-54°C~150°C	30min
Sand white	14567	280000~800000	7	10,000	-54°C~250°C	3hrs
Yellow	13577	16000~33000	10	10,000	-54°C~150°C	20min

．Pipe sealant can fix and seal metal pipe systems or fill the gaps between metal parts and threads, withstand pipeline pressure, and prevent loosening and leakage caused by thermal expansion, contraction or vibration. It is suitable for pipelines including gas transportation, liquid transportation, air and oil pressure and drinking water. It not only has excellent effect, but also has excellent chemical properties and compressive strength. It is an efficient sealing solution to replace traditional anti-leak tape.

■Retaining compound

Color	Item no.	Viscosity (cps)	Breakaway (N/mm²)	Working temp.	Fixture time
Green	12603	100~150	≧23	-54°C~150°C	10min
Green	12609	100~150	≧16	-54°C~150°C	10min
Green	12620	5000~12000	≧24	-54°C~230°C	30min
Green	12638	2000~3000	≧25	-54°C~180°C	5min
Green	12648	400~600	≧25	-54°C~180°C	5min
Green	12680	750~1750	≧19	-54°C~180°C	10min

．Retaining compounds are mainly used in the assembly of various metal cylindrical components. Such as bearings, bushings, latches, keyways, racks, hubs and pulleys, etc., replace the traditional high-cost, time-consuming and labor-intensive working methods such as press-fit, latches and keyways with simple light press-fit or sliding-fit methods.

■Gasketing sealant

Color	Item no.	Viscosity - cps	Gap performance	Working temp.	Cure speed
Pink	14510	40000~140000	0.25 (0.50) mm	-54°C~180°C	4~24hrs (30min~4hrs)
Purple	14515	150000~375000	0.25 (1.25) mm	-54°C~150°C	1~12hrs (15min~2hrs)
Red	14518	500000~1000000	0.25 (1.25) mm	-54°C~150°C	4~24hs (30min~4hrs)
Orange	14574	70000~120000	0.25 (0.50) mm	-54°C~150°C	1~12hrs (15min~2hrs)

* ( )The values shown are for those with activator added. Please contact your dealer for details.

． Gasket sealants are suitable for use on flat surfaces of all sizes and flange faces of any size. It replaces traditional gaskets, thereby reducing inventory costs. Its features include solvent-free composition, high viscosity, pressure resistance and ease of use. Advantages over pre-cut shims include simplified processing, lower defect rates, less production confusion, and compatibility with a variety of bonding methods.

☉ Contact us for more information.

．Example