⊙ Thread locker
Single component, solvent free, thread locker cured in the absence of air and in the presence of metal ions and locks studs, nuts, screws and any threaded fasteners. It prevents loosening caused by vibration, mechanical and thermal shock. Thread locker also resists gasoline, transmission fluid, anti freeze, and other chemicals. Thread locker adhesive also inhibits fretting corrosion and prevents the seizure and galling. It can replace the traditional screws, gaskets or washers with easier assembling process and better efficiency.
Item no. | Viscosity (cps) | Torque (kg/cm2) | Feature | Application |
420 | 1000 | 58 | low strength | tiny screw (frequent unscrew is needed) |
423 | 1000 | 115 | medium strength | regular size (reworkable) |
425 | 1600 | 230 | high strength | big screw (reworkable) |
427 | 500 | 230 | high strength | dual head screw, dia. less than 1 inch |
428 | 7000 | 230 | high temp resistance | up to 232℃ |
429 | 6500 | 270 | high strength | dual head screw, dia. over 1 inch |
431 | 12 | 75 | medium-high strength | gap filling |
⊙ Retaining compound
Retaining Compound is designed for the bonding of cylindrical fitting parts assembly such as: bearings, bushings, plugs, wheels and pulleys and other circular accessories, After fixed the working surface can be 100% fit and can stand very high torsion and shear strength. It would not loose by rotational parts and vibration.
Item no. | Viscosity (cps) | Torque (kg/cm2) | Feature | Application |
822 | 100~150 | 210 | fast curing | for regular cylindrical fitting parts |
824 | 1800~2200 | 281 | high strength | high viscosity, shear strength 281 kg/cm2 |
826 | 600~700 | 210 | high temp. resistance | up to 204℃, medium viscosity |
842 | 6300~7700 | 210 | high temp. | up to 232℃, high viscosity |
844 | 500~1000 | 245 | high strength | medium viscosity, fast curing |
846 | 1800~2200 | 281 | super high strength | high viscosity, good chemical resistance, shear strength 281 kg/cm2 |
⊙ Pipe sealant
Pipe sealant is designed for metal-metal bonds, which are resistant to shock and vibration with maximized efficiency. It cures on metal substrates in the absence of oxygen. The result is a seal which is inert to hydrocarbons, most acids, solvent, steam. It replace traditional PTFE tapes and dopes.
Item no. | Viscosity (cps) | Torque (kg/cm2) | Application |
912 | 3000 | 230 | forzen piping |
944 | 20000 | 50 | hydraulic piping |
946 | 600 | 100 | hydraulic piping |
920 PST | 350000 | 70 | regular piping |
940 PST | 550000 | 150 | ss piping, dia. up to 3 inches |
947 | 14000 | 50 | pneumatic and hydralic piping |
914 | 20000 | 50 | super high viscosity |